colorFabb XT-CF20 is a copolyester based carbon fiber composite material that is based on the unique Amphora 3D polymer from Eastman Chemical and is loaded with no less than 20% specially sourced carbon fibers suitable for 3D Printing. Combining carbon fibers in filaments material is not a new idea, but colorFabb has been able to combine a lot of desired properties into 1 new material :
Extreme High Flex Modulus (6.2 GPa), twice as stiff as PLA/PHA
Moderate strain at break (8-10%), so no extreme brittle filament, but toughness
High Glass Temp. (Tg = 80C)
Very high Melt strength
Very high Melt Viscosity
Good dimensional accuracy and stability
Low odor / Styrene Free solution
Easy processing on many platforms
High attractive matt black surface
CARBON FIBER IS ABRASIVE
A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. There colorFabb recommends to use nozzle’s from Stainless steel or hardened copper alloys.
Just think of all the great applications for a variety industries, that now will have a material that performs according to expectations. Functionality, stiffness, dimensional stability, heat resistant, what more can you ask? Applications in the RC Industry / Drones / Aerospace / Automotive / Prototyping and many more can now be developed on your desktop 3D Printer.
In-house production All colorFabb 3d printing filaments are produced in our own production facility, situated in the Netherlands. Since no external parties are involved in the making of colorFabb filament we can ensure consistent quality on every order.
Excellent diameter tolerance An important machine in our production are the laser measurement systems used to check the diameter of our filament real time during production. It’s measured over 1000 times per second and helps us guarantee that each spool of colorFabb 3d printing filament produced within tolerance. We can guarantee 0,05mm +/- on both 2,85mm and 1,75mm colorFabb 3d printing filament, which means you can rest assured that your printer is extruding the exact amount of material.
Packaging Within minutes of production a spool of colorFabb 3d printing filament is sealed airtight with a double barrier foil. To go the extra mile, we’ll also seal the fancy cardboard box that we use to ship our product. You can make sure colorFabb 3d printing filament is fresh and ready for 3d printing when you’re done unboxing.
In-house testing The colorFabb testlab features a wide range of popular 3d printers. We’re continuously testing on our 3d printers to keep checking the quality of the materials we produce and to develop exciting new materials for the maker community. If your not sure how to print with our materials on your 3d printer, please contact firstname.lastname@example.org
Material science ColorFabb was founded as a brand of Helian Polymers, a sister company of Peter Holland which have been active in the master batch and additives for the plastics processing industry. Our knowhow, network and partnerships is driving material innovations and quality. You can expect colorFabb to keep on developing interesting new materials, which will be tested on a variety of printers to make sure it’ll get the job done.
NET WEIGHT: 0.75 KG (1.65 LB)
240°C - 260°C
Adviced 3d print speed: 40 - 70 mm/s
Advised Heated bed: 60-70C
Build platform: For colorFabb_XT we advise to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.
We want to make sure that your shopping experience is truly worry-free, that's why we guarantee our everyday competitive prices & won't be beat on price! We will beat any advertised price on identical or comparable products!
If you find an identical or comparable item currently offered for less at a local competitor's store or website (including shipping, handling and fees, if applicable) before you buy or within 30 days of your purchase we’ll beat that price by 10% of the difference. In addition, should our own price be reduced after your purchase, present us with your original receipt within 30 days of purchase and we will match the price and refund you the difference.
How to make a request:
Simply contact us by phone, email or live chat and show us confirmation of the price that you have found for less from a local competitor via a complete URL (web address) of the product page on the competitor's website or via flyer/print-out (including shipping, handling and other fees, if applicable).
The product you’re comparing must:
Be priced in Canadian Dollars and include all fees, shipping costs, and other charges.
Be sold and shipped by a retailer AND authorized dealer located within Canada.
Be in stock, available for sale, and cannot be a limited time offer or available only in limited quantity.
Not be lower priced due to an advertising error, misprint, or special sale price
Special sale prices are excluded from this offer, these include but not limited to the following:
VIP SALE, Black Friday, Friends and Family, Cyber Monday, Boxing Day/Week, special educational prices, restricted offers, mail order offers, rebates, coupons, premiums, free or bonus offers, Original Equipment Manufacturer (OEM) prices, open box products, close-outs, liquidations, discontinued, clearances, demos, refurbished items, open box items, financing offers and errors or misprints.
Also excluded are marketplace sellers on websites such as Amazon.ca or resellers such as eBay.ca as well as any sellers whose products are refurbished or liquidated.
Canada & International Shipping:
We ship Canada wide as well as internationally. We use Canada Post, UPS, Purolator, Canpar & FedEx for our shipping solutions. Large shipments, 50kg or more may be shipped by freight. Shipping costs are automatically calculated by the carrier during the checkout process. Any additional shipping charges incurred as a result of incorrect or incomplete address information as well as delivery refusal will be at the customer's expense.
All orders are shipped "Signature not required" unless otherwise requested (additional charges may apply).
All orders are shipped directly from our Mississauga, Ontario warehouse.
Please note that international shipments may incur additional charges such as brokerage, duties, taxes or other cross border related fees. These fees are NOT calculated during the checkout process, are NOT charged by Filaments.ca and are completely out of our control. It is important to note that Filaments.ca does NOT charge any additional fees beyond what is stated on the order invoice. Any cross-border related fees are the sole responsibility of the purchaser and are handled between the purchaser and the country the good being imported into, including any related agencies and/or customs brokerage companies.
We offer free shipping within Canada for orders totaling CAD$125 or more before tax. We also offer free shipping within the 48 contiguous United States for orders totaling CAD$200 or more before tax. To take advantage of this offer, please choose the free shipping option during the checkout process.
We reserve the right to choose the most economical shipping method. The shipping fee coverage for the free shipping option is limited to shipping services with charges up to CAD$50.
Free shipping does not apply to bulk or custom orders with discounted pricing.
Please note that our cut-off time for shipping overnight is 03:00 PM (Eastern Time). This means that if you choose FedEx Overnight as your shipping option, the order must be placed by 03:00 PM (Eastern Time) in order to get the order the next business day (FedEx overnight orders placed on a Friday will be delivered the following business day / Monday). It is important to follow this cut-off time in order to allow our warehouse time to prepare your order and still hand it over to FedEx on time for their overnight service.
As soon as your order is fulfilled, you will receive an email confirmation including your tracking number. Some shipping options such as envelopes may not have a tracking number.
Please note that in case of a refused delivery or if a shipment fails to be delivered to you because no one is home or available to receive the package, the courier WILL send the package back to us at OUR expense. When this happens, we will try to contact you and make further arrangements. These additional shipping charges incurred as well as charges to re-ship the package, will be forwarded to you, the customer. Therefore, please ensure that someone is always available to receive the package or pick it up from your local post office/courier facility before the courier ships it back to us.
We strive to ship out orders as soon as same day for all orders placed by 2pm EST. Although depending on order specifications, it can take between 24 to 48 hours. Unexpected issues may further delay this process and will be communicated accordingly.
Out of Stock & "Sold Out" Products:
The inventory in our online store and the inventory in our warehouse are synced. When you purchase a product on our online store it means the product is already in stock and ready to ship. But on very rare occasions, technical issues might cause this sync to fail, and one or more of the products purchased might be out of stock. IF this happens, we will offer an alternative product or refund you for the out of stock item/s. Your order may be marked as "partially fulfilled", meaning we will immediately ship the items that are in stock and the rest will be shipped as soon as the item/s are back in stock.
Products marked as "Sold Out" or "Unavailable" are normally available again within 1-4 weeks. Feel free to check back or contact us for information about availability of specific products.
Order Pick Ups:
Customers in the Greater Toronto area are welcome to pickup orders at our Customer Pickup location in Mississauga. Please note that we require at least 1 business day notice for pickup orders. When placing an order online, simply choose the "PICKUP" option on the checkout page. After we process your order we will send you an additional email with details about the date and time your order will be ready to be picked up.
Pickup Address: 7355 Torbram Rd. Unit 15 Mississauga ON L4T 3W3
Please have your ID ready to pick up your package.
Buy in Store:
Products can also be purchased directly at our Mississauga pickup location using credit, debit or cash.
Worked great on the first print...albeit I spent some time on-line reviewing other people's print settings. Worked well even using a 0.4 nozzle. I would like to see the larger spools of this material stocked. I believe ColorFabb makes a 1.5 or 2 kg spool.
Love this stuff
Super rigide et belle aspect visuel .
Overpriced considering how good the house brand of CF PETG is, but this filament performed perfectly for replacing a worn out gear in a holiday trailer leveling jack. Easy to print, just make sure to have a wear resistant nozzle
I used to think this was a little pricey, but after finding out how easy it is to use and how strong it is, I don't really feel that way. It was a little experimenting to figure out the best settings for my machine, but I've really got it dialed in now.
The part in the picture is the extruder body for a Prusa Research i3 MK2 MultiMaterial machine, which was used to print it (on single extruder mode) using that same part installed as a replacement for the original (which I busted on a lifted print).
* This XT-CF20 part was printed with no fan at 248C with 70C bed and a 0.4mm steel nozzle.
* printed SLOWLY at only 20mm/sec with 0.15mm layer, retraction speed dialed way back to 10mm/sec as well
*I didn't need support for this, it bridges well, but works with support very well when needed.
This is Marvin (0% infill) after i tried to crush it several times with the biggest hammer i had on hand.
The filament prints well, just a tad sticky (way less than petg). Buy with confidence.
Had my doubts, but this stuff is GREAT!
OK, several projects printing 250 size multicopter arms with this, has been very good. The stiffer arms really made a difference.
But, the night I could not find wrenches for props, 10mm and 20mm, I took 2 minutes to draw, and printed only 5mm thick wrenches. And , ... WOW, they are awesome! I really cranked on these and there is no wear on the wrenches.
Now I printed several wrench kits for ALL my tool boxes. Man this stuff is way better than I thought!
A bit pricey, but I am scared to change brands as this one really works. Even inter-layer bonding is excellent and a single wall cube is stiff and you cannot separate the layers. I really had my doubts with this working, but I have to say it really is a useful filament to have on hand.