CARBONX™ Carbon Fiber PC Filament - Black - 2.85mm

3DXTech

3d filament net weight MATERIAL NET WEIGHT: 0.75KG
Custom sizes may be available, contact us for details.
3d print settings PRINT SETTINGS: SEE BELOW.
Print settings listed in the product description below.
3d data sheet Canada DATA SHEETS & COFC: AVAILABLE UPON REQUEST.
Contact us to inquire about documentation availability.

CarbonX™ Carbon Fiber Reinforced Polycarbonate (PC) Filament

3DXTech CarbonX Nylon Carbon Fiber Filament Canada

CarbonX™ CF-PC is a high-performance carbon fiber reinforced PC filament.  This filament is ideal for anyone that desires a structural component with high heat, high stiffness, excellent surface quality, and dimensional stability. Polycarbonate has a Tg of 147°C and offers some of the highest thermal performance on the 3D market. 

CarbonX™ CF grades are abrasive and will quickly wear out a brass nozzle.  We recommend using Hardened Steel Nozzles

3d printing temperature guideline Printing
Temperature:

Notes:

280°C - 310°C
  • Extruder:  280-310°C
  • Bed Temp:  110-120°C
  • Bed Prep:  PEI Sheet or tape, Kapton/PI Tape, Glue stick on clean glass, ABS/Acetone Slurry
  • Nozzle: We strongly recommend a 0.4mm orifice or larger using Hardened Nozzles
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
  • Support:  Our Aquatek water soluble support works great to create complex parts.