PolyLite™ PC Plus Polycarbonate - 0.75KG - Transparent - 2.85mm

PolyMaker

PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.

PolyLite™ PC (Formerly PC-Plus) is produced using a polycarbonate resin specifically engineered for 3D printing. It delivers good stiffness and heat resistance with light diffusing properties.

Young’s Modulus:
2307 ± 60 Mpa

Tensile Strength:
62.7 ± 1.3 Mpa

Bending Strength:
100.4 ± 2.7 Mpa

Charpy Impact Strength:
3.4 ± 0.1 kJ/m2

Glass Transition Temperature:
113˚C

Vicat Softening Temperature:
119˚C

 3d filament net weight

NET WEIGHT: 0.75 KG (1.65 LB)

3d printing temperature guideline Printing
Temperature:

Notes:

250°C - 270°C
  • Nozzle Temperature:
    250˚C – 270˚C

    Printing Speed:
    30mm/s – 50mm/s

    Bed Temperature:
    90˚C – 105˚C

    Bed Surface:
    MAGIGOO PC
    BUILDTAK

    Cooling Fan:
    OFF

  • Drying Settings:
    80˚C for 8h

    Recommended Support Materials:
    PolySupport

    Other:
    When printing with PolyLite™ PC it is recommended to use an enclosure. For large part it is recommended to use a heated chamber.
    It is recommended to anneal the printed part right after the printing process to release the residual internal stress.
    Annealing settings: 100˚C for 2h